1502	Cleaning up install temporary files for S3 driver: %s.
1503	The shutdown phase of install has begun for S3 driver: %s
1504	Cannot open Set File; no temporary Setup Archive files deleted (driver id: %s).
1505	Because the win.ini was modified by this install, the win.ini was flushed so the win.ini changes could take effect.
1506	The install temporary files were not deleted because the Set File could not be read (%s) .
1507	The phase 3 driver shutdown is ok (%s).
1510	Setup cannot continue because Driver IDs (SKU numbers) could not be retrieved from the command line.
1511	Setup cannot continue because a Driver ID (SKU number) could not be retrieved from the response file (%s).
1512	Setup cannot continue because an administration server name was not specified in the response file (%s).
1513	Setup cannot continue because the software license for %s prohibits it from being installed to server %s.
1514	Setup cannot continue because the specified Driver (SKU #%s) in the response file (%s) is not supported by the install you are performing.
1516	The reg key where the install setup files are stored (to be deleted by cleanup) could not be opened.
1517	For the shutdown phase of install, the set file could not be found, so cleanup of install temporary files did not complete and the OpenFile Case did not complete.
1518	The path of the setup.exe is neccessary for the restart that is required so that files that were open during install can be replaced. The setup.exe path could not be found.
1519	The attempt to get token priveleges for restart failed: windows api(%s), GetLastError value(%d). Please restart your machine to get full functionality from the programs you just installed.
1601	Exit Setup
1602	Are you sure you want to exit?
1603	The installation has not yet completed.\n\nIf you exit Setup now, the applications will not run properly.
However, you can resume the installation later, and it will continue from this point.\n\nAre you sure you want to exit?
1604	Exiting Setup
1605	Setup did not install any program files or modify any system files.\n\nWhen you are ready to install, run this Setup program again.
1606	When you are ready to resume the installation, run this Setup program again.
1607	Component
1608	Path
1609	Space Required
1610	  -  %d of %d components will be installed
1611	No component is selected.\n\nClick a component in the list before you click Change Path.
1612	No component is selected.\n\nClick a component in the list before you click the Components button.
1613	This component is a vital part of your application. If you do not install this component, and it has not been previously installed, your application will not run correctly.\n\nAre you sure you want to deselect it?
1615	Corel WordPerfect Suite 8 Setup
1616	Corel WordPerfect Suite 8
1617	Corel WordPerfect Suite 8
1618	Insufficient Disk Space
1619	  MB free
1620	  MB
1621	Compact Installation
1622	CD-ROM Installation
1623	Previous Component
1624	Previous Path
1625	Setup Type
1626	Component Name
1627	Filename
1628	Description
1629	This product has no Release Notes.
1630	No Release Notes are selected.\n\nClick a filename in the list before you click View.
1635	Corel office applications
1636	Preparing for Setup.  Please wait...
1638	Installation Information
1639	No components are selected for installation. Are you sure you want to continue?
1644	Removable Drive
1645	Fixed Drive
1646	RAM Drive
1647	Network
1648	Local
1649	Run from CD or Network
1650	Required Components are required programs and features that are used by multiple suite applications, such as the File Open dialog, the print processor, and more.
1651	Required Components
1652	Accessories are optional programs and features that are used by multiple suite applications, such as Spell Checker, QuickFinder, and more.
1653	Accessories
1654	Folder Name Error
1655	Access denied to path:  %s\n\nIt is likely that you do not have rights to this folder (or to create it, if it does not yet exist).
1656	The specified path is invalid:  %s\n\nA pathname cannot contain any of the following characters: \ / : * ? < > |
1657	The specified path is invalid:  %s
1658	Long filenames are not supported by the drive %s
1662	Folder:  %s  does not exist.  Do you want to create it?
1663	Exit Remove Program
1664	Are you sure you want to exit?
1665	Exiting Remove Program
1666	The Remove program did not remove any program files or modify any system files.\n\nIf you want to remove Corel applications at a later time, run the Remove program again.
1667	Space Available
1668	Drive or UNC Path
1669	Notepad.exe, the Windows text viewer, cannot be found.
1670	&Install program files to network location:
1671	&Install required workstation files to drive:
1672	Required Components are those features that are required for the program to run.
1673	Required Components
1674	This drive contains removable media.\n\nTo run correctly, your application will require the media to be in the drive.\n\nDo you want to continue?
1675	Select the shared Windows folder then click OK.
1676	This component will be removed because you are installing the same version of the component to a different path.
1677	This component will be removed because you are installing the same version of the component using a different setup type.
1678	This component will be removed because you are installing an older version of the component to the same path.
1679	Incomplete Setup
1680	Corel applications main workstation path
1681	Certain required components will be removed because you can only have one copy on your system.
1682	Certain required shared components will be removed because you can only have one copy on your system.
1683	Certain optional shared components will be removed because you can only have one copy on your system.
1684	Workstation Installation
1685	&Update current server installation on %s
1686	Some files installed at Setup time may have been modified since installation.  Removing these modified files will not remove any personal documents or files created while using Corel applications.
1687	Compressed Drive
1688	removeen.hlp
1689	No applications are selected for removal. To continue, you must select an application.
1690	Remove Program Information
1691	Please ensure that you have READ and WRITE rights on\n\n%s\n\nYou will not be able to continue the installation on this server\nwithout these rights.
1692	Server Rights
1693	This component is a vital part of your application. You cannot deselect it unless you are doing a Custom installation.
1694	Marginal Disk Space
1695	Invalid UNC path, you must have a valid server and volume name
1696	WordPerfect, Presentations, Quattro Pro, Desktop Application Director, and Envoy.
1697	WordPerfect only.
1698	CorelFLOW, Corel Screen Saver, Sidekick, Dashboard, and TrueType fonts.
1699	You are now ready to install the workstation files to the following path:
1700	%s\ is not accessible.  The device is not ready.
1701	WordPerfect, Presentations, Quattro Pro, InfoCentral, Desktop Application Director, and Envoy.
1702	WordPerfect only.
1703	CorelDRAW, CorelFLOW, Corel Time Line, Corel Screen Saver, Sidekick, Dashboard, and TrueType fonts.
1704	Invalid Serial Number
1705	The serial number is not valid.  Do you want to continue anyway?
1706	Could not open readme file
1707	Error Verifying Path
1708	Too many backslashes together.
1709	LICENSE
1710	The license agreement file %s cannot be found.\nSetup cannot continue without this file.
1711	Too Many Fonts Selected
1712	&Components...
1713	&View Font...
1714	Save Selections
1715	Your selections will be saved to the following response file:
1716	To save your selections, click Save.
1717	&Save
1718	NOTE:  Click Help for more information.
1719	Use UNC (Universal Naming Convention) paths for workstation installations.
1720	Require workstation drive mappings to match those used in this server installation.
1721	Setup8en.hlp
1722	You cannot deselect the default document language.\nYou must first set another language as the default.
1723	OK
1724	Corel WordPerfect Suite 8 Setup
1725	WP8Setup
1726	AaBbCcXxYyZz 0123456789!?
1727	Response Files (*.rsp) *.rspAll Files (*.*)*.*
1728	Rename Response File
1729	The specified path is a long folder name:  %s\n\nYou chose to force the use of short folder names. You may continue or change the path to a short name.
1730	Long Folder Name Detected
1731	A previous installation of an older version was detected.  Select the migration options to perform, and then click next.
1732	To use the location of files setting of the previous installation as the default Location of files in this installation, select the checkbox below.
2001	Fatal Error creating response file %s.
2002	Successful creation of response file %s.
2003	The User Interface is being initialized.
2004	The User Interface is finished.
2005	The user has exited from the User Interface.
2006	Error creating File Group %s in Module %s %s.
2007	Successful creation of File Group %s in Module %s %s.
2008	Error querying database for File Group %s in Module %s %s.
2009	User has selected File Group %s in Module %s %s.
2010	User has deselected File Group %s in Module %s %s.
2011	Error creating Location %s.
2012	Successful creation of Location %s.
2013	Error querying database for Location %s.
2014	Error creating Module %s %s.
2015	Successful creation of Module %s %s.
2016	Error querying database for Module %s %s.
2017	User has selected Module %s %s.
2018	User has deselected Module %s %s.
2019	Error creating Product %s %s.
2020	Successful creation of Product %s %s.
2021	Error querying database for Product %s %s.
2022	User has selected Product %s %s.
2023	User has deselected Product %s %s.
2024	Error creating Shipped File %s in Module %s %s, File Group %s.
2025	Successful creation of Shipped File %s in Module %s %s, File Group %s.
2026	Error querying database for Shipped File %s in Module %s %s, File Group %s.
2027	User has selected Shipped File %s in Module %s %s, File Group %s.
2028	User has deselected Shipped File %s in Module %s %s, File Group %s.
2029	Successful creation of Dependant File Group %s, Module %s %s, for File Group %s, Module %s %s.
2030	Error querying database for Dependant File Group %s, Module %s %s, for File Group %s, Module %s %s.
2031	Successful creation of Product Module %s %s, %s %s.
2032	Error querying database for Product Module %s %s, %s %s.
2033	Successful creation of Product %s %s, %s %s.
2034	Error querying database for Master Product %s %s, %s %s.
2035	Error querying database for Driver Module.
2036	The license for this software prohibits %s from being installed to server %s.
2101	Cannot access %s in Installed Profile.
2102	Cannot access %s in Shipped Profile.
2103	Cannot open Response File: %s.
2104	Cancel Product: %s.\nError: %s
2105	Product: %s not removed from Installed Profile\nbased on Custom Code determination.
2106	Product removed from Installed Profile: %s
2107	Ending processing of Product: %s.
2108	Canceling processing of Product: %s.
2109	Product has been marked as installed: %s
2110	Product not installed: %s
2111	Product added to Installed Profile: %s
2112	Cannot create Location: %s. \n\nYou can resume the install after this is fixed.
2113	Location: %s\ncannot be written to.\n\nYou can resume the install after this is fixed.
2114	Location: %s\ndoes not exist.\n\nCannot continue the install.
2115	Location %s\n was created on your system.
2116	Deinstalling Module: %s.
2117	Migrating Settings from Module %s to Module %s.
2118	Ending processing of Module: %s.
2119	Canceling processing of Module: %s.
2120	Module not installed: %s %s
2121	Section/Item not found in RSP file: %s
2122	Cannot read from Installation Profile
2123	Invalid same Product scenario found
2124	Invalid older Product scenario found
2125	Invalid newer Product scenario found
2126	Corel Application Management Directory not in RSP
2131	Starting translator
2132	Product not found: %s
2133	Canceling install data
2134	Beginning Shipped File data: %s
2135	Shipped File added to Installed Profile: %s
2136	Not enough memory
2137	Ending translator
2138	User Custom File added to Installed Profile: %s
2151	Starting install
2152	Ending install
2153	SF netresident copy success: %s
2154	Unable to copy file: %s
2155	Cannot load decompressor: %s\n\nYou can resume the install once this file is available.
2156	Stopping Archive: %s
2157	Workstation file complete: %s
2158	Archive ready: %s
2159	Archive completed: %s
2160	Archive error, could not decompress: \n\n%s\n\nThe archive is probably corrupt: \n\n%s\n\nYou can resume the install once this is fixed.
2161	Disk Full. There are %sMBs left to copy. \n\nYou can resume the install once you have freed up\n\nenough disk space.
2162	Starting Shipped File: %s
2163	Shipped File Installed: %s
2164	Starting File Group: %s
2165	Ending File Group: %s
2166	The Location %s is different from a previous install.  Installation cannot continue
2171	Ad Object Load Failed: %s
2172	Archive Object Load Failed: %s
2173	File Group Object Load Failed: %s
2174	Driver Object Load Failed: %s
2175	Shipped File Object Load Failed: %s
2176	Language Object Load Failed: %s
2177	Module Language Object Load Failed: %s
2178	User Custom File Object Load Failed: %s
2180	%s not in the Shipping Profile: %s
2181	%s not in the Installation Profile: %s
2182	Cannot write the %s to the IP: %s
2183	Cannot write the %s to the SP: %s
2184	Archived file not in the SP: %s\n\nShipped file not installed
2185	Need a new disk
2186	Please insert %s.
2187	%s file attributes: %s
2188	not found
2189	read only
2190	normal
2191	open access denied
2192	Archive not found: %s
2193	Opening Archive: %s
2194	Updating the Installation Profile.  Please wait...
2195	Component: 
2196	Updating the Administration Profile.  Please wait...
2197	Committing the Data to the Profile
2198	Updating Archive Data: %s
2199	All
2200	Ad
2201	Archive
2202	Archive Module Language
2203	Created File
2204	Driver
2205	Driver Ad
2207	Driver Module
2208	ENV Entry
2209	File
2210	File Group
2211	File Group
2212	File Group Ad
2213	File Group Dependencies
2214	Icon Location
2215	INI Entry
2216	Installed Icon
2217	Installed Icon Location
2218	Interface Language
2219	Language
2220	Location
2221	Master Product
2222	Module Dependencies
2223	Module Location
2224	Module Language
2225	Module
2226	Module
2227	Module Settings Record
2228	Product
2229	Product Module
2230	Persistent Setting Entry
2231	REG Entry
2232	Shipped File
2233	Shipped File
2234	Shipped File Setting Record
2235	Shipping Media
2236	Storage Device
2237	System Settings Record
2238	Resource String
2240	the CD or select the \nNetwork Location for %s
2241	Archived File not found: %s
2250	File date unknown, Shipped File not installed: %s
2251	Disk File date the same or newer, Shipped File not installed: %s
2252	Disk File Version the same or newer, Shipped File not installed: %s
2253	Shipped File was not installed, File on disk is read-only: %s
2254	Required File was not installed, File on disk is read-only: %s
2255	Shipped File not installed, Insufficient rights to directory/file: %s
2256	Shipped File not installed: %s
2257	Could not set file attribute to read-only: %s
2258	Application in use, Shipped File not installed: %s
2259	Error: Archive sequence number not found: %d.
2260	Archive
2261	Error: File cannot be copied onto itself: Shipped File not installed: %s
2262	Component is not available to be installed: %s
2263	Error: Copied file is corrupt: %s
2265	Error: Could not get the OS type for iengine.
2266	...Verifying
2267	A workstation option in the response file is invalid. Workstation users will \nonly be allowed to do Run-from-Network installs from this network install.\n\nContinue with setup?
2268	A workstation option in the response file is invalid. Workstation users \nwill only be allowed to do Local installs from this network install.\n\nContinue with setup?
2270	Quantum File record not in the 000: %s
2274	Driver Module Group
2275	Data Version
2276	File Group Language
2277	Module Group
2278	Module Group Module
2280	Module Document Language
2281	Driver OS Document Language
2282	OS Document Language
2283	User Information
2284	User Custom File
2285	The currently installed file is marked read-only:\n\n%s\n\nDo you want to replace this file?
2310	File date unknown, User Custom File not installed: %s
2311	Disk File date the same or newer, User Custom File not installed: %s
2312	User Custom File was not installed, File on disk is read-only: %s
2313	User Custom File not installed, Insufficient rights to directory/file: %s
2314	User Custom File not installed: %s
2315	User Custom File copy success: %s
2601	Starting to configure Module: %s %s.
2602	Error:Invalid Data for constructing Shipped File: Module Name %s, Module Version %s, FileGroupName %s, File Name %s,File Language %s, in Module: %s %s.
2603	Error: The attempt to begin the MOSR query failed for Module %s %s.
2604	Error: null pointer returned for new System Setting Record: %s %s with SSR id %s and SSR type %d, for Module: %s %s.
2605	Error:Invalid Data for constructing the System Setting Record %s %s for Module %s %s.
2606	Error:A System Setting Record was not found for the Module System Setting Record %s %s with SSR id %s.
2607	The Module %s %s has been successfully put to the IP.
2608	Error: The attempt to put the Module %s %s to the IP failed.
2609	Starting to configure the Shipped File with Module Name %s, Module Version %s, File Group Name %s, FileName %s and File Language %s.
2610	Error in Shipped File: null pointer returned for new System Setting Record %s %s with SSR id %s and SSR type %d.
2611	Error in Shipped File: Data to construct the System Setting Record %s %s with id %s and of type %d was invalid.
2612	Error in Shipped File: System Setting Record not found for the Shipped File SSR %s %s with id %s.
2613	Error in Shipped File: null pointer returned from new C_II for installed icon with Module Name %s, Module Version %s, and id %d.
2614	The following Shipped File was successfully put to the IP: Module Name %s, Module Version %s, File Group Name %s, File Name %s, File Language %s.
2615	Error: The attempt to put the following Shipped File to the IP failed: Module Name %s, Module Version %s, File Group Name %s, File Name %s, File Language %s.
2616	Error:There was an error reading the icon from the database for: Module %s %s, File Group %s, File Name %s, File Language %s.
2617	The Configuration Driver (ID: %s) loaded successfully from the Installation Profile.
2618	The Configuration Driver (ID: %s) could not be loaded from the Installation Profile.
2619	Configuration (Driver ID: %s) was completed successfully.
2620	Configuration (Driver ID: %s) was not completely successful.
2621	Error:Configuration could not write Driver (ID: %s) to the Installation Profile.
2622	Module %s, version %s, could not be initialized for Configuration.
2623	Error:Cannot continue with Configuration:  Response File %s is invalid.
2624	Error:Could not retrieve valid Installation Types from Response File %s.
2625	Error:No Modules were found in Response File %s.
2626	Error: Cannot continue with Configuration.  Insufficient memory for Response File %s.
2627	Error: Cannot continue with Configuration.  Error processing Response File %s.
2628	Error:An invalid or missing Install Location Type occurred in Response File %s.
2629	System Setting Record ID %s, Module %s, Version %s, was initialized successfully.
2630	Error:System Setting Record ID %s, Module %s, Version %s, was not initialized successfully.
2631	System Setting Record ID %s, Module %s, Version %s, was aborted.
2632	System Setting Record ID %s, Module %s, Version %s, was configured successfully.
2633	Error:System Setting Record ID %s, Module %s, Version %s, was not configured successfully.
2634	Error:System Setting Record ID %s, Module %s, Version %s, could not be written to the Installation Profile.
2635	Aborted installed icon for Module Name %s, Module Version %s, Icon ID %d.
2636	Created installed icon for Module Name %s, Module Version %s, Icon ID %d.
2637	Writing installed icon location for Module Name %s, Module Version %s, Icon ID %d, Icon Location %s.
2638	Error in Shipped File: Icon Location not found for Icon Location Name %s, Module Name %s, Module Version %s, Icon ID %d.
2639	Creating installed icon for Module Name %s, Module Version %s, Icon ID %d.
2640	Error:Target file path not obtained for Module Name %s, Module Version %s, Icon ID %d.
2641	Error:Icon file path not obtained for Module Name %s, Module Version %s, Icon ID %d.
2642	Error:Could not get path for icon location:  %s.
2643	Error:OleInitialize Error: %s 
2644	Configuration (Driver ID: %s) was canceled by the user.
2645	The files that could not be configured due to being open during initial install have been configured. Driver id: %s.
2646	Error: could not parse the icon Target Replacement attribute for Module (%s), Version(%s), IconID(%d).
2647	Ole was successfully initialized for configuration.
2648	Error:CoCreateInstance failed: Cannot create instance of IShellLink interface.
2649	Error: Cannot get IPersistFile interface in IShellLink.
2650	Error:The Installation Profile (a vital database file) could not be opened successfully.
2651	Error:The Shipping Profile (a vital database file) could not be opened successfully.
2652	Error:System Setting Record error: Could not load Created File object (%s, %s, %s) from Installation Profile.
2653	Error:System Setting Record error: Could not load Location object (%s, %s) from Installation Profile.
2654	Error:System Setting Record error: The following Environment File could not be opened: %s.
2655	Error:System Setting Record error: Environment File switch %s, value %s, could not be written to file %s.
2656	Error:System Setting Record, Initialization File section %s, entry %s, value %s, could not be written to file %s.
2658	Error:System Setting Record (ID %s, Module %s, Version %s): Could not write value.  Error Code: %ld.
2659	ERROR: The registry merge of the following file failed : file name (%s),original path(%s), modified path(%s), last error(%d).
2660	Error:Due to a %s,the registry information for the file %s failed: Module %s, Version %s.
2661	Error:A module could not be loaded for the self-reg file: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2662	Error:The persistent setting SSR could not be created for: SSRID (%s) of Module (%s) Version (%s) with GetLastError (%d).
2665	Error:Could not delete the following .gid file: %s. The Help indexes for this file will be incorrect until the .gid can be deleted! Module( %s ), Version( %s )
2666	Error:Configuration Could not delete the following .gid file: FileName (%s), Module (%s), Version (%s). The computer may need to be restarted to get the correct Help indexes if the cleanup exe also cannot delete it.
2667	Error:The CreateProcess() call for (%s /RegServer) failed: Module( %s ).
2668	Error:The self-reg function failed for: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2669	Error:The attempt to get the proc address for the self-reg function failed: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2670	Error:The attempt to read to VERSIONINFO struct failed due to a memory error: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2671	Error:The path for the self-reg file could not be verified: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2672	Error:An error occurred when attempting to read the VERSIONINFO struct for: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2673	Error:The self-reg code for the following function has not been implemented: FileName(%s), ModuleName(%s), ModuleVersion(%s).
2674	Error:For the following icon, there was not a corresponding Shipped File in the database: ModuleName(%s),ModuleVersion(%s),FileGroup Name(%s),ExeFile Name(%s),File Language(%s).
2675	System Setting Record ID %s, Module %s, Version %s, was not written to the registry so the existing value would not be overwritten.
2676	Error:The AddFontResource api call failed for: Filename(%s), ModuleName(%s), ModuleVersion(%s), GetLastError(%d).
2677	Error:The attempt to initialize the progress bar for the configuration dialog failed.
2678	Error: could not parse the icon Working Directory attribute for Module (%s), Version(%s), IconID(%d).
2679	Error: could not parse the icon Command Line Options attribute for Module (%s), Version(%s), IconID(%d).
2680	Error:The attempt to open or create the Fonts registry key failed during the processing of: FileName(%s), ModuleName(%s), ModuleVersion(%s), ErrorReturned(%d).
2681	ERROR: Since the attempt to create the COMMON icon location failed, an attempt to create a PERSONAL icon location was made: IconLocName(%s),OSType(%d),DefaultLoc(%s),SelectedLoc(%s),Flags(%X).
2682	Error:The .ttf file could not be registered for: Filename(%s), ModuleName(%s), ModuleVersion(%s), ErrorReturn(%d).
2683	Too Many Fonts Installed
2684	Error:The target replacement (the file the icon points to) is not installed: FileName(%s).
2685	Error:The file this icon points to was not installed: TargetFileName(%s), ModuleName(%s), IconId(%d).
2686	Error:The path or file does not exist so configuration will not be done on: PathAndFile(%s), FileName(%s), ModuleName(%s), ModuleVersion(%s).
2687	Error:(IDSTR_C_CENG_GetOSFailed) The attempt to get the OS type for cengine failed.
2688	Error:The following shortcut could not be created: Link(%s), ModuleName(%s), ModuleVersion(%s), IconID(%d), TitleResID(%s).
2689	Error:The use count could not be incremented in the registry because the SharedDlls registry key could not be accessed:ModuleName(%s),ModuleVersion(%s),FileName(%s),lReturn(%d).
2690	\nSSR Error: \nSSR Type(%s), CommonFunc(%d), APIFunc(%d), lRet(%d), AccessMask(Ox%X),\nSSRID(%s), ModuleName(%s), ModuleVer(%s),Function(%s),\nRootKey(Ox%X), SubKey(%s),\n Value Name(%s), Registry Data Type(%d).\n
2691	ERROR:TTF configuration failed: function( %s ), filename( %s ), LastError( %d ).
2692	ERROR: The font .ttf file is not in the windows system directory: FileName( %s ), Path of font file( %s ).
2693	ERROR: The attempt to get the location of the file failed: FileName(%s),ModuleName(%s),ModuleVersion(%s),ErrorValue(%d).
2694	ERROR: The string resource could not be loaded for: Filename(%s),ModuleName(%s),ModuleVersion(%s).
2695	\nBindERROR: The attempt to get the \corel\suite8\programs directory for bind.exe failed: Namdb Return Status(%d), Location (%s).
2696	\nBindERROR: Binding failed for: Image(%s), DLL to bind to(%s), Reason (%s).
2697	\nBind Success: ImageName(%s), Define(%s).
2698	\nBindERROR: The load module failed for imagehlp.dll, so binding was not be done: ImageHlp.dll(%s),Last Error(%d).
2699	\nBindERROR: The attempt to get the proc address for BindImageEx failed, so binding was not be done: Process Name(%s), Last Error(%d).
2700	\nBindERROR: The binding api failed for : FileName(%s), ModuleName(%s), ModuleVer(%s), Last Error(%d).\n
2701	\nBindFlagInformation: The flag that indicates binding should be run on this file is not set: FileName(%s), ModuleName(%s), ModuleVer(%s).
3251	Create a blank document
3252	WordPerfect 7
3253	<WPWin 7 Menu>
3254	<WPWin 7 Keyboard>
3255	standard.wpt
3256	standold.wpt
3257	stand7.wpt
3258	Found WPWin6.X
3259	Loaded SC70
3260	Found path to bif
3261	Found abExe path
3262	Found the lang ID
3263	Converted data from BIF
3264	WPWin6.X wasn't found
3265	SC7.0 failed to load
3266	Didn't find path to BIF
3267	Didn't find path to Address Book merge utility
3268	Didn't find language ID
3269	Failed to convert Address Book data found in the BIF to a text format file
3270	My Addresses
3271	wp7us.wpt
3272	wp7oldus.wpt
3273	wp7newus.wpt
3274	WordPerfect 6.1
3275	6.1 WordPerfect
3276	SGML
3277	WPSGML Menu
3278	Power Bar
3279	Open with &WordPerfect
3301	%s DLL Custom Notify Proc Not Found
3302	Custom DLL (%s) Not Found
3303	Custom DLL (%s) Wrong OS Version
3351	Apreg.wb2
3352	Arreg.wb2
3353	Autoexp.wb2
3354	Bankrec.wb2
3355	College.wb2
3356	Confroom.wb2
3357	hinvoice.wb2
3358	Hsinven.wb2
3359	Mortgage.wb2
3360	Networth.wb2
3361	Ordrform.wb2
3362	Poland.wb2
3363	Poport.wb2
3364	Purchreq.wb2
3365	Quote.wb2
3366	Salesord.wb2
3367	Sinvoice.wb2
3368	Template.wb2
3369	Travelex.wb2
3380	QPW.exe
3381	Formats.inf
3382	Series.inf
3390	Quattro Pro for Windows 6.0
3391	Quattro Pro for Windows 7
3400	Display
3401	International
3402	Macro
3403	FileOptions
3404	File Options
3405	General
3406	SetupVersion
3410	Install
3411	QPWPath
3412	TemplatePath
3420	DModeler.hlp
3421	QPW.hlp
3422	QPWref.hlp
3423	QPWtempl.hlp
3428	WINHLP32.EXE -G
3442	QPWHome
3451	The IP was empty and deleted
3452	Deinstall completed
3453	Deleted driver %s from the IP
3454	Started deinstalling products
3455	Could not deinstall product %s version %s, was not in IP
3456	Starting removal of an INI entry
3457	Finished removal of an INI entry
3458	Remove Products
3459	Cannot access the IP file \nContinue?
3460	Starting to deinstall product %s version %s
3461	Finished deinstalling product %s version %s
3462	Starting to remove product %s version %s
3463	Module %s version %s is shared and will not be uninstalled.
3464	Starting removal of an ENV entry
3465	Finished removal of an ENV entry
3466	Starting to remove a registry entry
3467	Finished removing a registry entry
3468	Created File %s has been deinstalled
3469	Shipped File %s has been deinstalled
3470	Starting to remove module %s ver %s.
3471	Finished removing module %s ver %s.
3473	Shipped File Object Load Failed: %s
3474	ERROR:Created File Object Load Failed: %s
3475	DENGINE8.DLL load failed, trying DENGINE7.DLL.
3476	DENGINE load failed.
3477	Error: null pointer returned for new SSR: %s %s with SSR id %s and SSR type %d, for Module: %s %s.
3478	Invalid Data for constructing the SSR %s %s for Module %s %s.
3479	Could not instantiate a new CF
3480	CF is invalid
3481	Could not instantiate a new SF
3485	Could not instantiate a new LO
3487	Starting removal of an SSR
3488	Finished removal of an SSR
3489	Starting to remove a location
3490	Finished removal of a Location
3491	Started to remove a PE entry
3492	The removal of the %sPS reg entry is complete: %sSSRID(%s), ModuleName(%s), ModuleVersion(%s).
3493	Starting removal of an Icon Location
3494	 ERROR:A module could not be loaded for the self-reg file: FileName (%s) of Module (%s).
3495	Error: The attempt to begin the MOSR query failed for Module %s %s.
3496	An %s was not found for the %s %s %s with id %s.
3497	Corel Remove
3498	File %s was modified, so it was not removed
3499	ERROR:The CreateProcess() call for (%s /UnRegServer) failed: Module( %s ).
3500	ERROR:The location for file (%s) of module (%s), version (%s), could not be obtained from the database.
3501	ERROR:The Begin query by files failed for file (%s) of module (%s), version (%s).
3502	ERROR:The Self-UnReg function failed for file (%s) of module (%s). 
3503	ERROR:The Proc Address for the self-registering file (%s) of module (%s) was not found.
3504	ERROR:There was a memory error when processing the self-unreg code for file (%s) of module (%s).
3505	ERROR:The path for the self-registering file (%s) of module (%s) could not be verified. 
3506	ERROR:There was an error when trying to access the VERSIONINFO for file (%s) of module (%s).
3507	ERROR:The removal of the following %sSSR has been aborted: %sSSRID (%s), ModuleName (%s), ModuleVersion (%s).
3508	ERROR:The attempt to instantiate an SSR for SF failed: Module(%s), ModuleVersion(%s), SSRID (%s), SSR type (%d).
3509	ERROR:The data for the following SSR is invalid: Module(%s), ModuleVersion (%s), SSRID (%s), SSR type (%d).
3510	ERROR:An %s was not found for the given %s: ModuleName(%s), ModuleVersion(%s), SSRID(%s).
3511	ERROR:Error Loading Self-UnReg Module for file (%s) of module (%s).
3512	 ERROR:The Created File object for this INI object could not be found in the database: ModuleName (%s), ModuleVersion (%s), FileName (%s).
3513	 ERROR:The location object for the Created File object could not be loaded: CF Location Name (%s), CF Location Version (%s). 
3514	 ERROR:The write of the previous value for the INI object failed: INIsection (%s), INIentry (%s), INIvalue (%s), File Path (%s).
3515	 ERROR:Could not find Module object: ModuleName (%s), ModuleVersion (%s) from the %s.
3516	ERROR:The Begin Query for matching Created Files failed: FileName (%s), ModuleName (%s), ModuleVersion (%s).
3517	ERROR:The self-reg function has not been implemented: FileName (%s), ModuleName (%s), ModuleVersion (%s).
3519	You must have rights to delete Registry keys under\nHKEY_LOCAL_MACHINE/Software and HKEY_CURRENT_USER/Software\nbefore you run Remove.  See an administrator for this machine to get rights.
3520	ERROR:The removal from the registry of the PS value failed: SSRID(%s), ModuleName(%s), ModuleVersion(%s).
3521	Deleted File Group %s from IP.
3522	ERROR:Failed to delete File Group %s from IP.
3523	Location %s version %s is shared and will not be uninstalled.
3524	ERROR:Failed to retrive %s record %s %s.
3525	Could not instantiate a new %s\n Continue?
3526	ERROR:The attempt to get the location for the following Created File failed: ModuleName(%s), FileName(%s), Location(%s).
3527	ERROR:The created file   could not be opened for: ModuleName (%s), ModuleVersion (%s), FileName (%s).
3528	Error: The attempt to begin the %s query failed for Module %s Ver %s %s.
3529	The removal process of the %sRE is complete: %sSSRID (%s), ModuleName (%s), ModuleVersion (%s).
3530	ERROR:%s object is invalid.
3533	ERROR:The attempt to write the previous PE value to the registry failed: SSRID (%s), ModuleName (%s), ModuleVersion (%s), LastError (%d).
3534	ERROR:The attempt to delete the %s from the OS failed: SSRID (%s), ModuleName (%s), ModuleVersion (%s), LastError (%d).
3535	The removal process of the %s is complete: SSRID (%s), ModuleName (%s), ModuleVersion (%s).
3536	ERROR:The attempt to write the previous EE failed: ModuleName (%s), ModuleVersion (%s), EnvSwitch (%s), EnvFileName(%s).
3537	Marking applications to remove.
3538	Removing configuration data.
3539	Removing application files and folders.
3540	ERROR:The ILT for ModuleName (%s) is undefined or NAM_ILT_UNKNOWN. Created File (%s) not removed.
3541	ERROR:The dependent module was not found in the ip: ModuleName(%s), ModuleVersion(%s), RequiredModule(%s), RequiredModVersion(%s).
3542	ERROR:The use count could not be decremented in the registry because the SharedDlls registry key could not be accessed:ModuleName(%s),ModuleVersion(%s),FileName(%s),lReturn(%d).
3543	\nSSR Error: \nSSR Type(%s), CommonFunc(%d), APIFunc(%d), lRet(%d), AccessMask(Ox%X),\nSSRID(%s), ModuleName(%s), ModuleVer(%s),Function(%s),\nRootKey(Ox%X), SubKey(%s),\n Value Name(%s), Registry Data Type(%d).\n
3544	ERROR:The DateTime field for this Shipped File is not in the data base: SF(%s), DateTime Value(%d).
3551	PDXWIN32.EXE
3552	SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths
3553	Path
3554	README.TXT
3555	/Register
3560	PAL$FORM.DLL
3561	PAL$RTL.DLL
3562	PAL$EVNT.DLL
3563	PALRTI.DLL
3564	ODAPICFG.EXE
3565	MASTPROG.HLP
3566	MASTUSER.HLP
3567	ODAPICFG.HLP
3568	PXDWGDSK.DLL
3569	MULTIHLP.DLL
3570	SQLTRANS.DB
3571	SQLTRANS.PX
3572	PXPALEXE.DLL
3580	ABMANAGE.FDL
3581	ABNEW.FDL
3582	ABPEOPLE.FDL
3583	ACCOUNTS.FDL
3584	ADDRESS.DB
3585	ADDRESS.PX
3586	ALERTS.FDL
3587	GROUP.FDL
3588	GPRPREFIN.DB
3589	GRPSTRUC.DB
3590	SPEEDBAR.FDL
3591	SUBADDRS.FDL
3592	WGACCNTS.DB
3593	WGROUP.DB
3594	WGROUP.PX
3595	WORKGRP.SDL
3600	TUTILITY.EXE
3601	TUTILITY.HLP
3602	TUTILITY.DOC
3603	TUTILITY.PIF
3604	TUTILITY.ICO
3605	OPAL.HLP
3606	PDOX.HLP
3607	PXERROR.HLP
3608	PXEXPERT.HLP
3609	WINHLP32.EXE -G
3610	Software\Borland\Paradox\8.0\Configuration\WorkDir
3611	Software\Borland\Paradox\8.0\Configuration\PrivDir
3612	Software\Borland\Paradox\8.0\Configuration\HomeDir
3620	Working
3621	Private
3622	PDOXHome
3630	Software\Borland\Paradox\8.0\Configuration
3631	UserName
3632	Company
3639	SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls
3640	pxchrt32.dll
3702	Corel Address Book
3703	\Address7
3704	Could not get path to Windows directory
3705	Path string not set when it should be
3706	REPLACE_ME_WITH_PATH_TO_ABDB
3707	Found interface language for Address Book install
3708	Could not find interface language for Address Book install
3709	Corel 8 Settings
3710	Could not load address directory string
3711	Could not identify install module
3712	Could not install Microsoft Exchange. Abort Corel install?
3731	11/04/1994
3751	Silent installation could not continue because the following applications were running:
3752	Desktop Application Director (DAD8)
3753	Envoy 7 (Envoy7)
3755	Paradox 8 (Pdxwin32)
3756	PerfectScript 8 (Ps80)
3757	Presentations 8 (Prwin80)
3758	Quattro Pro 8 (Qpw)
3759	WordPerfect 8 (Wpwin8)
3760	PerfectPrint Process 8 (Pfppop80)
3761	Microsoft Windows Messaging Update
3762	Microsoft Windows Messaging files are out of date and must be updated.\n\nThe Windows Messaging Setup will now run.
3763	The Corel WordPerect Suite 8 setup cannot be run until Microsoft Windows Messaging has been updated.\n\nPlease update Windows Messaging before attempting to install Corel WordPerfect Suite 8.
3764	The Microsoft Windows Messaging setup cannot be found.\n\nLook for WinMess.exe on your Corel WordPerfect Suite8 CD or network installation.\n\nIf installing from diskette to WindowsNT, run Add/Remove Programs NT Setup to install windows messaging.\nIf installing from diskette to Windows95, download exupdusa.exe from the Microsoft web site.
3765	Corel WordPerfect Suite 8 setup could not run because Microsoft Windows Messaging needs to be updated.
3804	IDAPI
3805	ODAPI
3807	IDAPI.CFG
3808	ODAPI.CFG
3811	IDAPINEW.CFG
3812	IDAPI32.DLL
3813	IDAPI.CNF
3814	IDAPINST.DLL
3820	USA.BLL
3821	USA2.BLL
3822	EUROPE.BLL
3829	SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls
3830	BDECFG32.EXE
3831	BDECFG32.HLP
3832	BLW32.DLL
3833	EUROPE.BLL
3834	IDAPI32.DLL
3835	IDASCI32.DLL
3836	IDBAT32.DLL
3837	IDDBAS32.DLL
3838	IDODBC32.DLL
3839	IDPDX32.DLL
3840	IDQRY32.DLL
3841	IDQRYSQL.DLL
3842	IDR20009.DLL
3843	USA.BLL
3844	USA2.BLL
3850	Could not open/set inital IDAPI registry values
3851	IDAPI merge failure, MergeCFG Error 1 (Cannot load/run IDAPI32.DLL)
3852	IDAPI merge failure, MergeCFG Error 2 (Existing CFG file is read-only)
3853	IDAPI merge failure, MergeCFG Error 7 (Merge function failed, corrupted CFG?)
3854	IDAPI fix failure, FixMerge Error 1 (Cannot load/run IDAPI32.DLL)
3855	IDAPI fix failure, FixMerge Error 2 (Existing CFG file is read-only)
3856	IDAPI fix failure, FixMerge Error 5 (Out of memory)
3857	IDAPI merge failure, cannot load/fix up IDAPINST.DLL
3858	IDAPI merge failure, Unknown error code
3859	Unable to configure IDAPI, please delete IDAPI32.DLL and IDAPI.CNF and re-install both BDE components
3860	0009